Weldig stud for Drawn Arc stud welding

Bimetallic stud type VBG for aluminum

This threaded stud type VBS is a combination of an aluminum bushing with a steel galvanized threaded stud. This way you can weld on aluminum ground material.

Thanks to the big-flange bushing it is much easier to weld this stud on ground material aluminum.

You weld it always with shielding gas.

General information about our welding studs

All our welding studs are produced according to DIN EN ISO 13918.
Stud length is always the length after welding.
Non-standard welding elements are delivered in compliance with DIN EN ISO 13918.
We offer all kind of accessories for our welding studs. Also for guns from other manufacturers.

Quality

We can create a material test certificate 2.1 or 3.1 if you need. Please inform us before you place your order!

The threads of our welding studs are cold rolled. Cold rolling of thread shows the following advantages:

no interruption of fiber orientation,
increase of strength by up to 200 %,
decrease of surface roughness in connection with
increased corrosion resistance.

Our welding studs are suitable for all common stud welding machines.

If you have any questions about stud welding please do not hesitate to ask! We are happy to help.

Information

Material:	Bushing Aluminum / threaded stud steel galvanized
Length (l1) after welding:	50mm to 1000mm
Diameter (d1):	M6 M8

Contact

Get advice!

We are happy to assist you with any questions regarding stud welding and our products.

Mr. Niklas Schelle

+49 (4161) 74 97 9-0

info@schelle-gmbh.de

Directly to the contact form