Welding stud for capacitor discharge (CD) stud welding

Fir tree studs

Threaded stud with ignition tip and flange produced according to ISO 13918

Also referred to as a saw tooth stud or coarse threaded stud. Fir tree studs have a special thread with a defined pitch (P) of 1.6 mm.

Especially suitable for the quick installation of snap-on elements such as plastic nuts or cable mountings.

General information about our welding studs

All our welding studs are produced according to DIN EN ISO 13918.
Stud length is always the length after welding.
Non-standard welding elements are delivered in compliance with DIN EN ISO 13918.
We also offer all kind of accessories for our welding studs. Also for guns from other manufacturers.

Qualität

We can create a material test certificate 2.1 or 3.1 if you need. Please inform us before you place your order!

All our welding studs are under constant quality control to ensure the best welding quality.

The threads of our welding studs are cold rolled. Cold rolling of thread shows the following advantages:

no interruption of fiber orientation,
increase of strength by up to 200 %,
decrease of surface roughness in connection with
increased corrosion resistance.

Our welding studs are suitable for all common stud welding machines.

If you have any questions about stud welding please do not hesitate to ask! We are happy to help.

Information

Material:	Steel copper coated, Stainless steel 1.4301 (A2-50), Stainless steel 1.4571 (A5-50), Aluminum (AlMg3) and brass
Diameter (d1):	M4, M5, M6, M8
Length (l1):	M4: 8 to max. 30 mm M5: 8 to max. 40 mm M6: 10 to max. 40 mm M8: 12 to max. 50 mm

Contact

Get advice!

We are happy to assist you with any questions regarding stud welding and our products.

Mr. Niklas Schelle

+49 (4161) 74 97 9-0

info@schelle-gmbh.de

Directly to the contact form