Weldig stud for Drawn Arc stud welding

Threaded stud with partial thread (PD)

This threaded stud type PD has a partial thread.

We can also supply this type of stud without aluminum ball suitable for stud welding with shielding gas.

Other materials and thread types (e.g. UNC) on request!

General information about our welding studs

Welding studs for drawn ARC welding with ceramic ferrule have a flux (aluminium ball) on the welding area. The flux will ignite the arc easier and the welding bath will deoxidized.
All our welding studs are produced according to DIN EN ISO 13918.
Stud length is always the length after welding.
Non-standard welding elements are delivered in compliance with DIN EN ISO 13918.
We offer all kind of accessories for our welding studs. Also for guns from other manufacturers.

Quality

We can create a material test certificate 2.1 or 3.1 if you need. Please inform us before you place your order!

The threads of our welding studs are cold rolled. Cold rolling of thread shows the following advantages:

no interruption of fiber orientation,
increase of strength by up to 200 %,
decrease of surface roughness in connection with
increased corrosion resistance.

Our welding studs are suitable for all common stud welding machines.

If you have any questions about stud welding please do not hesitate to ask! We are happy to help.

Information

Material:	Steel, Steel galvanized, Stainless steel A2-50/SS304, Stainless steel A4-50/SS316, Stainless steel A5-50/SS316Ti
Diameter (d1):	M6 M8 M10 M12 M16 M20 M22 M24
Diameter (d2):	5,35 7,19 9,03 10,86 14,6 18,38 20,38 22,05
Length (l1) after welding:	10mm to 500mm
Part without thread (y):	Please see technical datasheet
Part with thread (b):	Please see technical datasheet

Contact

Get advice!

We are happy to assist you with any questions regarding stud welding and our products.

Mr. Niklas Schelle

+49 (4161) 74 97 9-0

info@schelle-gmbh.de

Directly to the contact form