| Material: | Steel, Steel galvanized, Stainless steel A2-50/SS304, Stainless steel A4-50/SS316, Stainless steel A5-50/SS316Ti |
| Length (l1) after welding: | 10mm to 500mm |
| Diameter (d1): | M5 M6 M8 M10 M12 M16 M20 M22 M24 |
| Diameter (d2): | ?? 4,7 6,2 7,9 9,5 13,2 16,5 20 ?? |
| Part without thread (y): | 4 4 4 5 6 7,5/11 9/13 15 15 |
Weldig stud for Drawn Arc stud welding
Threaded stud with reduced base (RD)
This threaded stud type RD has a thread almost to the top of the welding tip.
The base is reduced to about the core diameter of the thread. Therefore, the weld fillet diameter will be only slightly bigger than the external diameter of the thread.
We can also supply this type of stud without aluminum ball suitable for stud welding with shielding gas.
Other materials and thread types (e.g. UNC) on request!
| General information about our welding studs |
Welding studs for drawn ARC welding with ceramic ferrule have a flux (aluminium ball) on the welding area. The flux will ignite the arc easier and the welding bath will deoxidized. All our welding studs are produced according to DIN EN ISO 13918. Stud length is always the length after welding. Non-standard welding elements are delivered in compliance with DIN EN ISO 13918. We offer all kind of accessories for our welding studs. Also for guns from other manufacturers. |
| Qualität |
We can create a material test certificate 2.1 or 3.1 if you need. Please inform us before you place your order! The threads of our welding studs are cold rolled. Cold rolling of thread shows the following advantages:
Our welding studs are suitable for all common stud welding machines. If you have any questions about stud welding please do not hesitate to ask! We are happy to help. |
Contact
Get advice!
We are happy to assist you with any questions regarding stud welding and our products.
Mr. Niklas Schelle
